Uniform Biological Material Transfer Agreement – MTA

Definitions

1. PROVIDER: Organization providing the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
2. PROVIDER SCIENTIST: The name and address of this party will be specified in an implementing letter.
3. RECIPIENT: Organization receiving the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
4. RECIPIENT SCIENTIST: The name and address of this party will be specified in an implementing letter.
5. ORIGINAL MATERIAL: The description of the material being transferred will be specified in an implementing letter.
6. MATERIAL: ORIGINAL MATERIAL, and PROGENY. The MATERIAL shall not include: (a) MODIFICATIONS, or (b) other substances created by the RECIPIENT through the use of the MATERIAL which are not MODIFICATIONS, PROGENY, or UNMODIFIED DERIVATIVES.
7. PROGENY: Unmodified descendant from the MATERIAL, such as virus from virus, cell from cell, or organism from organism, DNA/RNA duplicated by DNA/RNA supplied by the PROVIDER, purified or fractionated subsets of the ORIGINAL MATERIAL.
8. UNMODIFIED DERIVATIVES: Substances created by the RECIPIENT which constitute an unmodified functional subunit or product expressed by the ORIGINAL MATERIAL. Some examples include: proteins expressed by DNA/RNA supplied by the PROVIDER, or monoclonal antibodies secreted by a hybridoma cell line.
9. MODIFICATIONS: Substances created by the RECIPIENT which contain/incorporate the MATERIAL, and UNMODIFIED DERIVATIVES.
10. COMMERCIAL PURPOSES: The sale, lease, license, or other transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. COMMERCIAL PURPOSES shall also include uses of the MATERIAL or MODIFICATIONS by any organization, including RECIPIENT, to perform contract research, to screen compound libraries, to produce or manufacture products for general sale, or to conduct research activities that result in any sale, lease, license, or transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. However, industrially sponsored academic research shall not be considered a use of the MATERIAL or MODIFICATIONS for COMMERCIAL PURPOSES per se, unless any of the above conditions of this definition are met.
11. NONPROFIT ORGANIZATION(S): A university or other institution of higher education or an organization any nonprofit scientific or educational organization qualified under a nonprofit organization statute. As used herein, the term also includes government agencies.

Terms and Conditions of this Agreement

1. The PROVIDER retains ownership of the MATERIAL, including any MATERIAL contained or incorporated in MODIFICATIONS.

2. The RECIPIENT retains ownership of: (a) MODIFICATIONS (except that, the PROVIDER retains ownership rights to the MATERIAL included therein), and (b) those substances created through the use of the MATERIAL or MODIFICATIONS, but which are not PROGENY, UNMODIFIED DERIVATIVES or MODIFICATIONS (i.e., do not contain the ORIGINAL MATERIAL, PROGENY, UNMODIFIED DERIVATIVES). If either 2 (a) or 2 (b) results from the collaborative efforts of the PROVIDER and the RECIPIENT, joint ownership may be negotiated.

a) is to be used solely for teaching and academic research purposes;
b) will not be used in human subjects, in clinical trials, or for diagnostic purposes involving human subjects without the written consent of the PROVIDER;
c) is to be used only at the RECIPIENT organization and only in the RECIPIENT SCIENTIST's laboratory under the direction of the RECIPIENT SCIENTIST or others working under his/her direct supervision;
d) will not be transferred to anyone else outside the RECIPIENT organization without the prior written consent of the PROVIDER.

4. The RECIPIENT and the RECIPIENT SCIENTIST agree to refer to the PROVIDER any request for the MATERIAL from anyone other than those persons working under the RECIPIENT SCIENTIST's direct supervision. To the extent supplies are available, the PROVIDER or the PROVIDER SCIENTIST agrees to make the MATERIAL available, under a separate implementing letter to this Agreement or other agreement having terms consistent with the terms of this Agreement, to other scientists (at least those at NONPROFIT ORGANIZATION(S)) who wish to replicate the RECIPIENT SCIENTIST's research; provided that such other scientists reimburse the PROVIDER for any costs relating to the preparation and distribution of the MATERIAL.

a) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute substances created by the PROVIDER through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
b) Under a separate implementing letter to this Agreement (or an agreement at least as protective of the PROVIDER's rights), the RECIPIENT and/or the RECIPIENT SCIENTIST may distribute substances created by the RECIPIENT through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
c) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS to NONPROFIT ORGANIZATION(S) for research and teaching purposes only.
d) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MATERIAL for COMMERCIAL PURPOSES. It is recognized by the PROVIDER that such COMMERCIAL PURPOSES may NOT require a commercial license from the RECIPIENT and the RECIPIENT has no obligation to grant a commercial license to its ownership interest in the MATERIAL. Nothing in this paragraph, however, shall prevent the PROVIDER from granting commercial licenses under the PROVIDER's intellectual property rights claiming such MATERIAL, or methods of their manufacture or their use.
e) The RECIPIENT and/or the RECIPIENT SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS for COMMERCIAL PURPOSES. It is recognized by the RECIPIENT that such COMMERCIAL PURPOSES may NOT require a commercial license from the PROVIDER and the PROVIDER has no obligation to grant a commercial license to its ownership interest in the MATERIAL incorporated in the MODIFICATIONS. Nothing in this paragraph, however, shall prevent the RECIPIENT from granting commercial licenses under the RECIPIENT's intellectual property rights claiming such MODIFICATIONS, or methods of their manufacture or their use.

6. The RECIPIENT acknowledges that the MATERIAL is or may be the subject of a patent application. Except as provided in this Agreement, no express or implied licenses or other rights are provided to the RECIPIENT under any patents, patent applications, trade secrets or other proprietary rights of the PROVIDER, including any altered forms of the MATERIAL made by the PROVIDER. In particular, no express or implied licenses or other rights are provided to use the MATERIAL, MODIFICATIONS, or any related patents of the PROVIDER for COMMERCIAL PURPOSES.

7. If the RECIPIENT desires to use or license the MATERIAL for COMMERCIAL PURPOSES, the RECIPIENT agrees, in advance of such use, to negotiate in good faith with the PROVIDER to establish the terms of a commercial license. It is understood by the RECIPIENT that the PROVIDER shall have no obligation to grant such a license to the RECIPIENT, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MATERIAL to any third party(ies), subject to any pre-existing rights held by others and obligations to the Federal Government.

8. If the PROVIDER desires to use or license the MODIFICATIONS for COMMERCIAL PURPOSES, the PROVIDER agrees, in advance of such use, to negotiate in good faith with the RECIPIENT to establish the terms of a commercial license. It is understood by the PROVIDER that the RECIPIENT shall have no obligation to grant such a license to the PROVIDER, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MODIFICATIONS to any third party(ies), subject to any pre-existing rights held by others and obligations to theGovernment.

9. The PROVIDER is free to file patent application(s) claiming inventions made by the PROVIDER through the use of the MODIFICATIONS but agrees to notify the RECIPIENT upon filing a patent application claiming MATERIAL or method(s) of manufacture or use(s) of the MATERIAL.

10. The RECIPIENT is free to file patent application(s) claiming inventions made by the RECIPIENT through the use of the MATERIAL but agrees to notify the PROVIDER upon filing a patent application claiming MODIFICATIONS or method(s) of manufacture or use(s) of the MATERIAL.

11. Any MATERIAL delivered pursuant to this Agreement is understood to be experimental in nature and may have hazardous properties. The PROVIDER MAKES NO REPRESENTATIONS AND EXTENDS NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE USE OF THE MATERIAL WILL NOT INFRINGE ANY PATENT, COPYRIGHT, TRADEMARK, OR OTHER PROPRIETARY RIGHTS.

12. Except to the extent prohibited by law, the RECIPIENT assumes all liability for damages which may arise from its use, storage or disposal of the MATERIAL. The PROVIDER will not be liable to the RECIPIENT for any loss, claim or demand made by the RECIPIENT, or made against the RECIPIENT by any other party, due to or arising from the use of the MATERIAL by the RECIPIENT, except to the extent permitted by law when caused by the gross negligence or willful misconduct of the PROVIDER.

13. This agreement shall not be interpreted to prevent or delay publication of research findings resulting from the use of the MATERIAL or the MODIFICATIONS. The PROVIDER SCIENTIST agrees to provide appropriate acknowledgment of the source of the MODIFICATIONS in all publications. The RECIPIENT SCIENTIST agrees to provide appropriate acknowledgment of the source of the MATERIAL in all publications.

14. The PROVIDER agrees to use the MODIFICATIONS in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA. The RECIPIENT agrees to use the MATERIAL in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA.

i) if termination should occur under 15(a), the RECIPIENT shall be bound to the PROVIDER by the least restrictive terms applicable to the MATERIAL obtained from the then-available resources; and
ii) if termination should occur under 15(b) or (d) above, the RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS; and
iii) In the event the PROVIDER terminates this Agreement under 15( c) other than for breach of this Agreement or for cause such as an imminent health risk or patent infringement, the PROVIDER will defer the effective date of termination for a period of up to one year, upon request from the RECIPIENT, to permit completion of research in progress. Upon the effective date of termination, or if requested, the deferred effective date of termination, RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS.

16.Paragraphs 6, 11 and 12 shall survive termination.

17.The MATERIAL is provided at no cost, or with an optional transmittal fee solely to reimburse the PROVIDER for its preparation and distribution costs. If a fee is requested by the PROVIDER, the amount will be indicated in an implementing letter. Main Text Ends Here.

RECIPIENT: Kangma-Healthcode (Shanghai) Biotech Co. Ltd.
RECIPIENT SCIENTIST: Rongrong Zhan
RECIPIENT ADDRESS: Building 15, Lane 118 Furonghua Road, Shanghai 201321, CHINA
RECIPIENT TEL: 021-58086922
RECIPIENT EMAIL: customer@healthcodon.com

Protocol Specification

提示

阅读并同意隐私协议、MTA和使用条款后进行下一步!

Nuoto® AutoExtracter-32 Nucleic Acid Extractor- OurProteinFactory

Nuoto® AutoExtracter-32 Nucleic Acid Extractor

Product code

PROTN_D2Pi32Aaec

98000.0 ￥ 19600.00

Size

Nuoto® AutoExtracter-32

5fz High Q Plasmid AutoExtraction (mini)

5fz High Q Plasmid AutoExtraction (midi/max)

5fz Fast Plasmid AutoExtraction (mini)

5fz Genome DNA AutoExtraction

5fz PCR DNA/RNA AutoPurification

5fz Gel AutoExtraction

5fz Nucleic Acid AutoConcentration

5fz Endotoxin AutoRemoval

Quantity

All of our products are guaranteed with with the 30-day return/refund policy. Please shop with 100% satisfaction.

Free shipping for order over $1000 USD.

Add To Cart

Order Now

Successfully added to shopping cart

32 Channels

Nuoto^RAutoExtracter-32核酸提取仪

32通道
50分钟提取
稳定性能

Nuoto^® AutoExtracter-32 nucleic acid extractor can run 1-32 channels, the program can complete nucleic acid extraction in as fast as 50 minutes, and its performance is stable.

高通量，
更快、更省心。

Nuoto^® AutoExtracter-32 具有32根强磁棒，可在50分钟内完成1-32份样品的DNA/RNA提取。 Nuoto^® AutoExtracter-32 has 32 strong magnetic rods, which can extract DNA/RNA from 1-32 samples in 50 minutes.

32根强磁棒
每次可实现1-32份样本提取
50分钟即可完成提取程序

更好的重复性。

Nuoto^® AutoExtracter-32 具有高稳定性自动化控制系统，有效避免人为操作偏差。 Nuoto^® AutoExtracter-32 has a highly stable automatic control system, which effectively avoids human operation deviation.

紫外线定时开关杀菌，降低实验室污染率高效防污染

核心部件升级，维护更方便！

Nuoto^® AutoExtracter-32 采用模块化结构设计，核心部件升级，具有更高精度、更低故障率，使得维护更加方便。 Nuoto^® AutoExtracter-32 adopts modular structure design, core components are upgraded, with higher precision and lower failure rate, making maintenance more convenient. 更高精度、更低故障率。

全自动更简单

取代手动实验操作，节约日常繁琐重复操作;

rapid 仅需六步，即可完成

开门自动暂停程序，
超安全。

Nuoto^® AutoExtracter-32 开门自动暂停程序，保障操作安全。内置排气系统，同时具有定时紫外光杀菌功能，有效杜绝微生物污染。全自动搭配一次性耗材，减少操作者与有害试剂的接触。

Nuoto^® AutoExtracter-32 automatically suspends the program when opening the door to ensure safe operation. The built-in exhaust system also has the function of timed ultraviolet light sterilization, effectively preventing microbial pollution. Automatically match disposable consumables to reduce the operator's contact with harmful reagents.

英

寸

彩

色

触

摸

屏

创意效果，仅供参考，以实物为准。 The creative effect is for reference only, and the actual product shall prevail.

10 英寸彩色触摸大屏，尽显操作细节。

Nuoto^® AutoExtracter-32搭载10 英寸彩色触摸屏，中英文显示，触控操作，便捷高效；强大的程序编辑功能，支持程序自定义，可储存 1-204 组程序，满足多种提取需求。 Nuoto^® convenient and efficient; powerful program editing function, support program customization, can store 1-204 groups of programs, to meet a variety of extraction needs.

PCR仪器

Nuoto全自动核酸提取仪

每台PCR仪器都要匹配一台Nuoto

水浴锅

Nuoto全自动核酸提取仪

每台水浴锅都要匹配一台Nuoto

Nuoto全自动核酸提取仪

离心机

每一台Nuoto都会节省一台离心机

Nuoto全自动核酸提取仪

每一台Nuoto都会节省一位实验员

更好防止交叉污染

八大核心功能

替代手动提取，高速有效

Plasmid DNA 酶切、转化、PCR、体外转录、测序等...
Genome DNA NGS、PCR、DNA克隆、DNA测序、DNA电泳、Southern杂交
Cellular RNA RT-PCR、qPCR、cDNA合成、核酸酶保护分析
Cf DNA/RNA qPCR、ddPCR、NGS
Gel Extract DNA/RNA 转化、体外转录、测序、PCR、酶切
PCR Purify DNA/RNA 测序、PCR、体外转录、酶切
Endotoxin
Removal DNA 转化、体外转录、测序、PCR、酶切
Concentrate DNA/RNA 测序、PCR、体外转录、酶切

5fz质粒自动提取试剂盒-深孔板装（磁珠法)
5fz Plasmid AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：酶切、转化、PCR、体外转录、测序等

5fz 基因组DNA自动提取试剂盒-深孔板装（磁珠法）
5fz Genome DNA AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：NGS、PCR、DNA克隆、DNA测序、DNA电泳、Southern杂交

5fz 胞质RNA自动提取试剂盒-深孔板装（磁珠法）
5fz Cellular RNA AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：RT-PCR、qPCR、cDNA合成、核酸酶保护分析

5fz外泌体核酸自动提取试剂盒-深孔板装（磁珠法）
5fz Cf DNA/RNA AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：qPCR、ddPCR 、NGS

5fz 凝胶自动回收试剂盒-深孔板装（磁珠法）
5fz Gel AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：测序、PCR、体外转录、酶切

5fz PCR自动回收试剂盒-深孔板装（磁珠法）
5fz PCR AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
下游应用：测序、PCR、体外转录、酶切

5fz 内毒素自动去除试剂盒-深孔板装（磁珠法）
5fz Endotoxin AutoRemoval Kit-DeepWell Plate(Magnetic Beads)
下游应用:转化、体外转录、测序、PCR、酶切

5fz 核酸自动浓缩试剂盒深孔板装（磁珠法）
5fz Nucleic Acid AutoConcentration Kit-DeepWell Plate(Magnetic Beads)
下游应用：转化、体外转录、测序、PCR、酶切

提取效果以及下游应用数据

50-200ng/uL任意浓度可得

技术参数 Technical Parameters

High-Throughput Nucleic Acid Automatic Extractor

Name

Nuoto^R AutoExtracter-32 Nucleic Acid Extractor
Product Code

PROTN_D2Pi32Aaec
Channels

1~32
Number of Magnets

32
Orifice Type

96 DeepWell Plate
Processing Volume

1ml-1.6ml
Magnetic Bead Recovery Rate

＞95%
Difference Between Purified Holes

CV<5%
Stir and Mix

Slow, medium and fast multi-level editable settings
Extraction Time

9-30 Minutes/Time
Screen Size

10 Inches
Operation Interface

10-inch Chinese and English color LCD display + touch operation
Internal Procedures

Program Can be Edited Freely 204 Programs Can be Stored
Process Management

Can be Programmed, Create a New Process, Edit a Process, Delete a Process, etc.
Safely Control

Automatically Pause The Program When Opening The Door
Pollution Control

Circulating Air Duct + UV Disinfection
Shock Mixing

Editable Mixed Methods for Different Needs
Lysis/Elution Heating Temperature

Room Temperature to +99℃
Data Storage

Can be Stored, Built-in Storage Device
Operating Temperature

+10 ~ +40℃
Working Humidity

10~90% Relative Humidity (Non-Condensing)
Power Input

AC 220V，50Hz
Power

300W
Dimensions

L*W*H = 428 * 396 * 397 mm
Gross Weight

25 kg
Period of use

6 Years

5fz Plasmid AutoExtraction Kit

Name

5fz Plasmid AutoExtraction Kit- DeepWell Plate(Magnetic Beads)
Specification

三合一深孔板
Throughput

32

注释 Annotation

以上页面中的出现的产品图片仅作示意，实物产品效果(包括但不限于外观、颜色、尺寸)可能略有差异，请以实物为准。实际使用中可能因产品个体差异、使用条件和环境因素不同而略有不同，请以实际使用的情况为准。
由于产品批次和生产供应因素实时变化，为尽可能提供准确的产品信息、规格参数、产品特性，OurProteinFactory 可能实时调整和修订以上页面中的文字表述、图片效果等内容，以求与实际产品性能规格、指数、零部件等信息相匹配。如遇确有进行上述修改和调整必要的情形，恕不专门通知。

The product pictures appearing on the above page are for illustration only, the actual product effects (including but not limited to appearance, color, size) may be slightly different, please refer to the actual product. In actual use, there may be slight differences due to individual differences in the product, use conditions and environmental factors. Please refer to the actual use.
Due to the real-time changes in product batches and production supply factors, in order to provide as accurate product information, specification parameters and product characteristics as possible, OurProteinFactory may adjust and revise the text descriptions, picture effects and other content on the above pages in real time to match the actual product performance Specifications, indices, parts and other information are matched. In the event that the above-mentioned modifications and adjustments are indeed necessary, no special notice will be given.

FOOT

More ways to contact,Building #12-15, Furonghua Road, Pudong District, Shanghai, China Zip: 200120， please call +1-800-955-3390or+86-400-770-5500 email to customer@ourproteinfactory.comMonday to Sunday 0:00-24:00

沪公网安备 31011502014489号

America

Uniform Biological Material Transfer Agreement – MTA

Definitions

Terms and Conditions of this Agreement

PROTEIN FACTORY

PROTEIN FACTORY

SIGN UP

RESET PASSWORD

Successfully Set up!

Nuoto® AutoExtracter-32 Nucleic Acid Extractor