Uniform Biological Material Transfer Agreement – MTA

Definitions

1. PROVIDER: Organization providing the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
2. PROVIDER SCIENTIST: The name and address of this party will be specified in an implementing letter.
3. RECIPIENT: Organization receiving the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
4. RECIPIENT SCIENTIST: The name and address of this party will be specified in an implementing letter.
5. ORIGINAL MATERIAL: The description of the material being transferred will be specified in an implementing letter.
6. MATERIAL: ORIGINAL MATERIAL, and PROGENY. The MATERIAL shall not include: (a) MODIFICATIONS, or (b) other substances created by the RECIPIENT through the use of the MATERIAL which are not MODIFICATIONS, PROGENY, or UNMODIFIED DERIVATIVES.
7. PROGENY: Unmodified descendant from the MATERIAL, such as virus from virus, cell from cell, or organism from organism, DNA/RNA duplicated by DNA/RNA supplied by the PROVIDER, purified or fractionated subsets of the ORIGINAL MATERIAL.
8. UNMODIFIED DERIVATIVES: Substances created by the RECIPIENT which constitute an unmodified functional subunit or product expressed by the ORIGINAL MATERIAL. Some examples include: proteins expressed by DNA/RNA supplied by the PROVIDER, or monoclonal antibodies secreted by a hybridoma cell line.
9. MODIFICATIONS: Substances created by the RECIPIENT which contain/incorporate the MATERIAL, and UNMODIFIED DERIVATIVES.
10. COMMERCIAL PURPOSES: The sale, lease, license, or other transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. COMMERCIAL PURPOSES shall also include uses of the MATERIAL or MODIFICATIONS by any organization, including RECIPIENT, to perform contract research, to screen compound libraries, to produce or manufacture products for general sale, or to conduct research activities that result in any sale, lease, license, or transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. However, industrially sponsored academic research shall not be considered a use of the MATERIAL or MODIFICATIONS for COMMERCIAL PURPOSES per se, unless any of the above conditions of this definition are met.
11. NONPROFIT ORGANIZATION(S): A university or other institution of higher education or an organization any nonprofit scientific or educational organization qualified under a nonprofit organization statute. As used herein, the term also includes government agencies.

Terms and Conditions of this Agreement

1. The PROVIDER retains ownership of the MATERIAL, including any MATERIAL contained or incorporated in MODIFICATIONS.

2. The RECIPIENT retains ownership of: (a) MODIFICATIONS (except that, the PROVIDER retains ownership rights to the MATERIAL included therein), and (b) those substances created through the use of the MATERIAL or MODIFICATIONS, but which are not PROGENY, UNMODIFIED DERIVATIVES or MODIFICATIONS (i.e., do not contain the ORIGINAL MATERIAL, PROGENY, UNMODIFIED DERIVATIVES). If either 2 (a) or 2 (b) results from the collaborative efforts of the PROVIDER and the RECIPIENT, joint ownership may be negotiated.

a) is to be used solely for teaching and academic research purposes;
b) will not be used in human subjects, in clinical trials, or for diagnostic purposes involving human subjects without the written consent of the PROVIDER;
c) is to be used only at the RECIPIENT organization and only in the RECIPIENT SCIENTIST's laboratory under the direction of the RECIPIENT SCIENTIST or others working under his/her direct supervision;
d) will not be transferred to anyone else outside the RECIPIENT organization without the prior written consent of the PROVIDER.

4. The RECIPIENT and the RECIPIENT SCIENTIST agree to refer to the PROVIDER any request for the MATERIAL from anyone other than those persons working under the RECIPIENT SCIENTIST's direct supervision. To the extent supplies are available, the PROVIDER or the PROVIDER SCIENTIST agrees to make the MATERIAL available, under a separate implementing letter to this Agreement or other agreement having terms consistent with the terms of this Agreement, to other scientists (at least those at NONPROFIT ORGANIZATION(S)) who wish to replicate the RECIPIENT SCIENTIST's research; provided that such other scientists reimburse the PROVIDER for any costs relating to the preparation and distribution of the MATERIAL.

a) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute substances created by the PROVIDER through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
b) Under a separate implementing letter to this Agreement (or an agreement at least as protective of the PROVIDER's rights), the RECIPIENT and/or the RECIPIENT SCIENTIST may distribute substances created by the RECIPIENT through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
c) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS to NONPROFIT ORGANIZATION(S) for research and teaching purposes only.
d) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MATERIAL for COMMERCIAL PURPOSES. It is recognized by the PROVIDER that such COMMERCIAL PURPOSES may NOT require a commercial license from the RECIPIENT and the RECIPIENT has no obligation to grant a commercial license to its ownership interest in the MATERIAL. Nothing in this paragraph, however, shall prevent the PROVIDER from granting commercial licenses under the PROVIDER's intellectual property rights claiming such MATERIAL, or methods of their manufacture or their use.
e) The RECIPIENT and/or the RECIPIENT SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS for COMMERCIAL PURPOSES. It is recognized by the RECIPIENT that such COMMERCIAL PURPOSES may NOT require a commercial license from the PROVIDER and the PROVIDER has no obligation to grant a commercial license to its ownership interest in the MATERIAL incorporated in the MODIFICATIONS. Nothing in this paragraph, however, shall prevent the RECIPIENT from granting commercial licenses under the RECIPIENT's intellectual property rights claiming such MODIFICATIONS, or methods of their manufacture or their use.

6. The RECIPIENT acknowledges that the MATERIAL is or may be the subject of a patent application. Except as provided in this Agreement, no express or implied licenses or other rights are provided to the RECIPIENT under any patents, patent applications, trade secrets or other proprietary rights of the PROVIDER, including any altered forms of the MATERIAL made by the PROVIDER. In particular, no express or implied licenses or other rights are provided to use the MATERIAL, MODIFICATIONS, or any related patents of the PROVIDER for COMMERCIAL PURPOSES.

7. If the RECIPIENT desires to use or license the MATERIAL for COMMERCIAL PURPOSES, the RECIPIENT agrees, in advance of such use, to negotiate in good faith with the PROVIDER to establish the terms of a commercial license. It is understood by the RECIPIENT that the PROVIDER shall have no obligation to grant such a license to the RECIPIENT, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MATERIAL to any third party(ies), subject to any pre-existing rights held by others and obligations to the Federal Government.

8. If the PROVIDER desires to use or license the MODIFICATIONS for COMMERCIAL PURPOSES, the PROVIDER agrees, in advance of such use, to negotiate in good faith with the RECIPIENT to establish the terms of a commercial license. It is understood by the PROVIDER that the RECIPIENT shall have no obligation to grant such a license to the PROVIDER, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MODIFICATIONS to any third party(ies), subject to any pre-existing rights held by others and obligations to theGovernment.

9. The PROVIDER is free to file patent application(s) claiming inventions made by the PROVIDER through the use of the MODIFICATIONS but agrees to notify the RECIPIENT upon filing a patent application claiming MATERIAL or method(s) of manufacture or use(s) of the MATERIAL.

10. The RECIPIENT is free to file patent application(s) claiming inventions made by the RECIPIENT through the use of the MATERIAL but agrees to notify the PROVIDER upon filing a patent application claiming MODIFICATIONS or method(s) of manufacture or use(s) of the MATERIAL.

11. Any MATERIAL delivered pursuant to this Agreement is understood to be experimental in nature and may have hazardous properties. The PROVIDER MAKES NO REPRESENTATIONS AND EXTENDS NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE USE OF THE MATERIAL WILL NOT INFRINGE ANY PATENT, COPYRIGHT, TRADEMARK, OR OTHER PROPRIETARY RIGHTS.

12. Except to the extent prohibited by law, the RECIPIENT assumes all liability for damages which may arise from its use, storage or disposal of the MATERIAL. The PROVIDER will not be liable to the RECIPIENT for any loss, claim or demand made by the RECIPIENT, or made against the RECIPIENT by any other party, due to or arising from the use of the MATERIAL by the RECIPIENT, except to the extent permitted by law when caused by the gross negligence or willful misconduct of the PROVIDER.

13. This agreement shall not be interpreted to prevent or delay publication of research findings resulting from the use of the MATERIAL or the MODIFICATIONS. The PROVIDER SCIENTIST agrees to provide appropriate acknowledgment of the source of the MODIFICATIONS in all publications. The RECIPIENT SCIENTIST agrees to provide appropriate acknowledgment of the source of the MATERIAL in all publications.

14. The PROVIDER agrees to use the MODIFICATIONS in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA. The RECIPIENT agrees to use the MATERIAL in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA.

i) if termination should occur under 15(a), the RECIPIENT shall be bound to the PROVIDER by the least restrictive terms applicable to the MATERIAL obtained from the then-available resources; and
ii) if termination should occur under 15(b) or (d) above, the RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS; and
iii) In the event the PROVIDER terminates this Agreement under 15( c) other than for breach of this Agreement or for cause such as an imminent health risk or patent infringement, the PROVIDER will defer the effective date of termination for a period of up to one year, upon request from the RECIPIENT, to permit completion of research in progress. Upon the effective date of termination, or if requested, the deferred effective date of termination, RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS.

16.Paragraphs 6, 11 and 12 shall survive termination.

17.The MATERIAL is provided at no cost, or with an optional transmittal fee solely to reimburse the PROVIDER for its preparation and distribution costs. If a fee is requested by the PROVIDER, the amount will be indicated in an implementing letter. Main Text Ends Here.

RECIPIENT: Kangma-Healthcode (Shanghai) Biotech Co. Ltd.
RECIPIENT SCIENTIST: Rongrong Zhan
RECIPIENT ADDRESS: Building 15, Lane 118 Furonghua Road, Shanghai 201321, CHINA
RECIPIENT TEL: 021-58086922
RECIPIENT EMAIL: customer@healthcodon.com

Protocol Specification

提示

阅读并同意隐私协议、MTA和使用条款后进行下一步!

ProteinFactory Orb 330/180 LCD Digital Shaker- OurProteinFactory

ProteinFactory Orb 330/180 LCD Digital Shaker

Product code

PROTN_ORB330LCDDS

835.75

Size

Orb 180 Standard Petri Dish Tray Set

Orb 330 Petri Dish Tray Set

Quantity

All of our products are guaranteed with with the 30-day return/refund policy. Please shop with 100% satisfaction.

Free shipping for order over $1000 USD.

Add To Cart

Order Now

Successfully added to shopping cart

OrbLCDShaker

yáo

摇？

怎么摇？

How to shake?

由你来定！

It's up to you!

Orb 180/330 圆周式摇床是专门用来配合 ProteinFactory 产品反应的高手。
3小时（100-200rpm转速），即可完成无细胞合成蛋白质缓和振荡反应（ProteinFactory 无细胞合成蛋白质反应需要氧气参与，反应液面高度建议≤5~8 mm 效果更佳）。

The Orb 180/330 Circumferential Shaker is specially designed to match the reaction of ProteinFactory products.
3 hours (100-200rpm rotation speed), the cell-free protein synthesis and oscillation reaction can be completed
(ProteinFactory cell-free protein synthesis reaction requires oxygen to participate, the height of the reaction liquid level is recommended to be ≤5~8 mm for better results).

温和,
高效振荡。

周转直径 4 mm （Orb 180），10 mm（Orb 330），内置安全转速保护功能，使用更省心、安全。

Orb digital control circular shaker, gentle and efficient oscillation. The turnover diameter is 4 mm (Orb 180), 10 mm (Orb 330), and the built-in safety speed protection function is more worry-free and safe to use.

宽电压设计，
运行稳定。

最大载重 2.5 Kg （Orb 180，含夹具），7.5 Kg （Orb 330）。应用电压100~240 V，50/60 Hz。

Wide voltage design, stable operation. The maximum load is 2.5 Kg (Orb 180, including fixtures), 7.5 Kg (Orb 330). The applied voltage is 100~240 V, 50/60 Hz.

Orb 180/330 圆周式摇床采用直流无刷电机，可靠免维护。可通过 RS232 接口连接电脑，专用的 ShakerPC 数据输出软件免费下载，可实现在电脑上对仪器参数的设定及工作曲线的实时显示。

Orb 180/330 circular shaker adopts DC brushless motor, which is reliable and maintenance-free. It can be connected to a computer through the RS232 interface, and the dedicated ShakerPC data output software can be downloaded for free, which can realize the setting of instrument parameters and the real-time display of the working curve on the computer.

双LCD，
更清晰。

Orb 180/330 圆周式摇床采用双 LCD 屏，速度、时间可分别显示。100~800 rpm速度范围（Orb 330为100~500 rpm），时间设定1分钟~19小时59分钟。

The Orb 180/330 circular shaker adopts dual LCD screens, and the speed and time can be displayed separately. 100~800 rpm speed range (Orb 330 is 100~500 rpm), time setting is 1 minute to 19 hours and 59 minutes.

同时合成，
更灵活！

Orb 180/330 圆周式摇床可一次性合成多种蛋白质，多蛋白合成更灵活。（ProteinFactory 无细胞合成蛋白质反应需要氧气参与，反应液面高度建议≤5~8 mm 效果更佳）。

The Orb 180/330 circular shaker can synthesize multiple proteins at one time, and the synthesis of multiple proteins is more flexible. (ProteinFactory cell-free protein synthesis reaction requires oxygen to participate, and the height of the reaction liquid level is recommended to be ≤5~8 mm for better results).

更快速

Super Fast

2-3 Hours

Room Temperture
（20 ~ 30℃）

Orb 180/330 圆周式摇床配合 ProteinFactory 无细胞合成蛋白质产品反应，
在室温（20 ~ 30℃）条件下2~3小时，即可得到目标蛋白，为使用者节省大量时间和精力。

The Orb 180/330 circular shaker cooperates with the ProteinFactory cell-free synthesis of protein
products to react, and the target protein can be obtained at room temperature (20 ~ 30℃) for 2 to 3 hours,
which saves users a lot of time and energy.

摇晃制造更多蛋白质

Shake to Make More Protein

反应杯

Reaction Cup for ProteinFactory

φ 7.4 cm 适用 5-10 mL ProteinFactory 反应液；
φ 4.4 cm 适用 1-4 mL ProteinFactory 反应液。
ProteinFactory 反应需要氧气，反应液面高度建议
≤5-8 mm 更佳。

φ 7.4 cm is suitable for 5-10 mL ProteinFactory reaction
solution, and φ 4.4 cm is suitable for 1-4 mL ProteinFactory
reaction solution. ProteinFactory reaction requires oxygen,
and the height of the reaction liquid level is recommended
to be ≤5-8 mm.

Learn More

培养板、皿

Culture Plate, Disposable Petri Dish

6/12/24/48/96-Well TC、非TC培养板，
Φ 7/10 cm 培养皿。ProteinFactory 反应
需要氧气，反应液面高度建议 ≤5-8 mm 更佳。

6/12/24/48/96-Well TC, Non-TC Culture Plate, Φ
7/10 cm culture dish. ProteinFactory reaction
requires oxygen, and the height of the reaction
liquid level is recommended to be ≤5-8 mm.

Learn More

技术参数

Technical Parameters

ProteinFactory Orb 330/180 LCD Digital Shaker

Model	Orb 330	Orb 180
Product Code	PROTN_ORB330LCDDS	PROTN_ORB180LCDDS
Turnover Diameter	10 mm	4 mm
Maximum Load	7.5 kg	2.5 kg
Motor Type	Brushless DC Motor	Brushless DC Motor
Motor Input Power	28 W	28 W
Motor Output Power	15 W	15 W
Speed Graph	100-500 rpm	100-800 rpm
Speed Display	LCD	LCD
Timer Display	LCD	LCD
Time Setting Template	1 Minute to 19 Hours 59 Minutes	1 Minute to 19 Hours 59 Minutes
Voltage	100-240V, 50/60Hz	100-240V, 50/60Hz
Power	30 W	30 W
Weight	13.5 kg	8.1 kg
Temperature and Humidity	5~40℃, 80%	5~40℃, 80%
Dimensions (Length x Width x Height)	420 × 370 × 100 mm	340 × 300 × 100 mm
Enclosure Rating	IP21	IP21
Data Interface	RS232	RS232

以上页面中的出现的产品图片仅作示意，实物产品效果(包括但不限于外观、颜色、尺寸)可能略有差异，请以实物为准。实际使用中可能因产品个体差异、使用条件和环境因素不同而略有不同，请以实际使用的情况为准。
由于产品批次和生产供应因素实时变化，为尽可能提供准确的产品信息、规格参数、产品特性，OurProteinFactory 可能实时调整和修订以上页面中的文字表述、图片效果等内容，以求与实际产品性能规格、指数、零部件等信息相匹配。
如遇确有进行上述修改和调整必要的情形，恕不专门通知。

The product pictures appearing on the above page are for illustration only, the actual product effects (including but not limited to appearance, color, size) may be slightly different, please refer to the actual product. In actual use, there may be slight differences due to individual differences in the product, use conditions and environmental factors. Please refer to the actual use.
Due to the real-time changes in product batches and production supply factors, in order to provide as accurate product information, specification parameters and product characteristics as possible, OurProteinFactory may adjust and revise the text descriptions, picture effects and other content on the above pages in real time to match the actual product performance Specifications, indices, parts and other information are matched.
In the event that the above-mentioned modifications and adjustments are indeed necessary, no special notice will be given.

FOOT

More ways to contact,Building #12-15, Furonghua Road, Pudong District, Shanghai, China Zip: 200120， please call +1-800-955-3390or+86-400-770-5500Monday to Sunday 0:00-24:00

沪公网安备 31011502014489号

America

Uniform Biological Material Transfer Agreement – MTA

Definitions

Terms and Conditions of this Agreement

PROTEIN FACTORY

PROTEIN FACTORY

SIGN UP

RESET PASSWORD

Successfully Set up!

ProteinFactory Orb 330/180 LCD Digital Shaker