Uniform Biological Material Transfer Agreement – MTA

Definitions

1. PROVIDER: Organization providing the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
2. PROVIDER SCIENTIST: The name and address of this party will be specified in an implementing letter.
3. RECIPIENT: Organization receiving the ORIGINAL MATERIAL. The name and address of this party will be specified in an implementing letter.
4. RECIPIENT SCIENTIST: The name and address of this party will be specified in an implementing letter.
5. ORIGINAL MATERIAL: The description of the material being transferred will be specified in an implementing letter.
6. MATERIAL: ORIGINAL MATERIAL, and PROGENY. The MATERIAL shall not include: (a) MODIFICATIONS, or (b) other substances created by the RECIPIENT through the use of the MATERIAL which are not MODIFICATIONS, PROGENY, or UNMODIFIED DERIVATIVES.
7. PROGENY: Unmodified descendant from the MATERIAL, such as virus from virus, cell from cell, or organism from organism, DNA/RNA duplicated by DNA/RNA supplied by the PROVIDER, purified or fractionated subsets of the ORIGINAL MATERIAL.
8. UNMODIFIED DERIVATIVES: Substances created by the RECIPIENT which constitute an unmodified functional subunit or product expressed by the ORIGINAL MATERIAL. Some examples include: proteins expressed by DNA/RNA supplied by the PROVIDER, or monoclonal antibodies secreted by a hybridoma cell line.
9. MODIFICATIONS: Substances created by the RECIPIENT which contain/incorporate the MATERIAL, and UNMODIFIED DERIVATIVES.
10. COMMERCIAL PURPOSES: The sale, lease, license, or other transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. COMMERCIAL PURPOSES shall also include uses of the MATERIAL or MODIFICATIONS by any organization, including RECIPIENT, to perform contract research, to screen compound libraries, to produce or manufacture products for general sale, or to conduct research activities that result in any sale, lease, license, or transfer of the MATERIAL or MODIFICATIONS to a for-profit organization. However, industrially sponsored academic research shall not be considered a use of the MATERIAL or MODIFICATIONS for COMMERCIAL PURPOSES per se, unless any of the above conditions of this definition are met.
11. NONPROFIT ORGANIZATION(S): A university or other institution of higher education or an organization any nonprofit scientific or educational organization qualified under a nonprofit organization statute. As used herein, the term also includes government agencies.

Terms and Conditions of this Agreement

1. The PROVIDER retains ownership of the MATERIAL, including any MATERIAL contained or incorporated in MODIFICATIONS.

2. The RECIPIENT retains ownership of: (a) MODIFICATIONS (except that, the PROVIDER retains ownership rights to the MATERIAL included therein), and (b) those substances created through the use of the MATERIAL or MODIFICATIONS, but which are not PROGENY, UNMODIFIED DERIVATIVES or MODIFICATIONS (i.e., do not contain the ORIGINAL MATERIAL, PROGENY, UNMODIFIED DERIVATIVES). If either 2 (a) or 2 (b) results from the collaborative efforts of the PROVIDER and the RECIPIENT, joint ownership may be negotiated.

a) is to be used solely for teaching and academic research purposes;
b) will not be used in human subjects, in clinical trials, or for diagnostic purposes involving human subjects without the written consent of the PROVIDER;
c) is to be used only at the RECIPIENT organization and only in the RECIPIENT SCIENTIST's laboratory under the direction of the RECIPIENT SCIENTIST or others working under his/her direct supervision;
d) will not be transferred to anyone else outside the RECIPIENT organization without the prior written consent of the PROVIDER.

4. The RECIPIENT and the RECIPIENT SCIENTIST agree to refer to the PROVIDER any request for the MATERIAL from anyone other than those persons working under the RECIPIENT SCIENTIST's direct supervision. To the extent supplies are available, the PROVIDER or the PROVIDER SCIENTIST agrees to make the MATERIAL available, under a separate implementing letter to this Agreement or other agreement having terms consistent with the terms of this Agreement, to other scientists (at least those at NONPROFIT ORGANIZATION(S)) who wish to replicate the RECIPIENT SCIENTIST's research; provided that such other scientists reimburse the PROVIDER for any costs relating to the preparation and distribution of the MATERIAL.

a) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute substances created by the PROVIDER through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
b) Under a separate implementing letter to this Agreement (or an agreement at least as protective of the PROVIDER's rights), the RECIPIENT and/or the RECIPIENT SCIENTIST may distribute substances created by the RECIPIENT through the use of the ORIGINAL MATERIAL only if those substances are not PROGENY, UNMODIFIED DERIVATIVES, or MODIFICATIONS.
c) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS to NONPROFIT ORGANIZATION(S) for research and teaching purposes only.
d) The PROVIDER and/or the PROVIDER SCIENTIST shall have the right, without restriction, to distribute MATERIAL for COMMERCIAL PURPOSES. It is recognized by the PROVIDER that such COMMERCIAL PURPOSES may NOT require a commercial license from the RECIPIENT and the RECIPIENT has no obligation to grant a commercial license to its ownership interest in the MATERIAL. Nothing in this paragraph, however, shall prevent the PROVIDER from granting commercial licenses under the PROVIDER's intellectual property rights claiming such MATERIAL, or methods of their manufacture or their use.
e) The RECIPIENT and/or the RECIPIENT SCIENTIST shall have the right, without restriction, to distribute MODIFICATIONS for COMMERCIAL PURPOSES. It is recognized by the RECIPIENT that such COMMERCIAL PURPOSES may NOT require a commercial license from the PROVIDER and the PROVIDER has no obligation to grant a commercial license to its ownership interest in the MATERIAL incorporated in the MODIFICATIONS. Nothing in this paragraph, however, shall prevent the RECIPIENT from granting commercial licenses under the RECIPIENT's intellectual property rights claiming such MODIFICATIONS, or methods of their manufacture or their use.

6. The RECIPIENT acknowledges that the MATERIAL is or may be the subject of a patent application. Except as provided in this Agreement, no express or implied licenses or other rights are provided to the RECIPIENT under any patents, patent applications, trade secrets or other proprietary rights of the PROVIDER, including any altered forms of the MATERIAL made by the PROVIDER. In particular, no express or implied licenses or other rights are provided to use the MATERIAL, MODIFICATIONS, or any related patents of the PROVIDER for COMMERCIAL PURPOSES.

7. If the RECIPIENT desires to use or license the MATERIAL for COMMERCIAL PURPOSES, the RECIPIENT agrees, in advance of such use, to negotiate in good faith with the PROVIDER to establish the terms of a commercial license. It is understood by the RECIPIENT that the PROVIDER shall have no obligation to grant such a license to the RECIPIENT, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MATERIAL to any third party(ies), subject to any pre-existing rights held by others and obligations to the Federal Government.

8. If the PROVIDER desires to use or license the MODIFICATIONS for COMMERCIAL PURPOSES, the PROVIDER agrees, in advance of such use, to negotiate in good faith with the RECIPIENT to establish the terms of a commercial license. It is understood by the PROVIDER that the RECIPIENT shall have no obligation to grant such a license to the PROVIDER, and may grant exclusive or non-exclusive commercial licenses to others, or sell or assign all or part of the rights in the MODIFICATIONS to any third party(ies), subject to any pre-existing rights held by others and obligations to theGovernment.

9. The PROVIDER is free to file patent application(s) claiming inventions made by the PROVIDER through the use of the MODIFICATIONS but agrees to notify the RECIPIENT upon filing a patent application claiming MATERIAL or method(s) of manufacture or use(s) of the MATERIAL.

10. The RECIPIENT is free to file patent application(s) claiming inventions made by the RECIPIENT through the use of the MATERIAL but agrees to notify the PROVIDER upon filing a patent application claiming MODIFICATIONS or method(s) of manufacture or use(s) of the MATERIAL.

11. Any MATERIAL delivered pursuant to this Agreement is understood to be experimental in nature and may have hazardous properties. The PROVIDER MAKES NO REPRESENTATIONS AND EXTENDS NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE USE OF THE MATERIAL WILL NOT INFRINGE ANY PATENT, COPYRIGHT, TRADEMARK, OR OTHER PROPRIETARY RIGHTS.

12. Except to the extent prohibited by law, the RECIPIENT assumes all liability for damages which may arise from its use, storage or disposal of the MATERIAL. The PROVIDER will not be liable to the RECIPIENT for any loss, claim or demand made by the RECIPIENT, or made against the RECIPIENT by any other party, due to or arising from the use of the MATERIAL by the RECIPIENT, except to the extent permitted by law when caused by the gross negligence or willful misconduct of the PROVIDER.

13. This agreement shall not be interpreted to prevent or delay publication of research findings resulting from the use of the MATERIAL or the MODIFICATIONS. The PROVIDER SCIENTIST agrees to provide appropriate acknowledgment of the source of the MODIFICATIONS in all publications. The RECIPIENT SCIENTIST agrees to provide appropriate acknowledgment of the source of the MATERIAL in all publications.

14. The PROVIDER agrees to use the MODIFICATIONS in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA. The RECIPIENT agrees to use the MATERIAL in compliance with all applicable statutes and regulations, including Public Health Service and National Institutes of Health regulations and guidelines such as, for example, those relating to research involving the use of animals or recombinant DNA.

i) if termination should occur under 15(a), the RECIPIENT shall be bound to the PROVIDER by the least restrictive terms applicable to the MATERIAL obtained from the then-available resources; and
ii) if termination should occur under 15(b) or (d) above, the RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS; and
iii) In the event the PROVIDER terminates this Agreement under 15( c) other than for breach of this Agreement or for cause such as an imminent health risk or patent infringement, the PROVIDER will defer the effective date of termination for a period of up to one year, upon request from the RECIPIENT, to permit completion of research in progress. Upon the effective date of termination, or if requested, the deferred effective date of termination, RECIPIENT will discontinue its use of the MATERIAL and will, upon direction of the PROVIDER, return or destroy any remaining MATERIAL. The RECIPIENT, at its discretion, will also either destroy the MODIFICATIONS or remain bound by the terms of this agreement as they apply to MODIFICATIONS.

16.Paragraphs 6, 11 and 12 shall survive termination.

17.The MATERIAL is provided at no cost, or with an optional transmittal fee solely to reimburse the PROVIDER for its preparation and distribution costs. If a fee is requested by the PROVIDER, the amount will be indicated in an implementing letter. Main Text Ends Here.

RECIPIENT: Kangma-Healthcode (Shanghai) Biotech Co. Ltd.
RECIPIENT SCIENTIST: Rongrong Zhan
RECIPIENT ADDRESS: Building 15, Lane 118 Furonghua Road, Shanghai 201321, CHINA
RECIPIENT TEL: 021-58086922
RECIPIENT EMAIL: customer@healthcodon.com

协议说明

提示

阅读并同意隐私协议、MTA和使用条款后进行下一步!

Chamfer Cutter- OurProteinFactory

Chamfer Cutter

产品编号

PROTN_CCN01M00001

￥

141.25 ￥ 449.74

规格

InnoPAGE 4-20% Tris-Glycine POLYACRYLAMIDE GEL - 10 Well

InnoPAGE 4-20% Tris-Glycine POLYACRYLAMIDE GEL - 12 Well

InnoPage 4-20% Bis-Tris Gradient Page Gel - 10 Well

InnoPage 4-20% Bis-Tris Gradient Page Gel - 12 Well

Proexlle Quick InnoPage Electrophoresis Tank

Chamfer Cutter

InnoPage Empty Plate - 10 Well

InnoPage Empty Plate - 12 Well

InnoPage Void Plate

InnoPage Gel Casting Base

InnoPage Pre-Stained 3-Color Protein Marker - 100 Uses

InnoPage BritBlue Protein Loading Buffer 5x

InnoPage SDS BritBlue Protein Loading Buffer 5x

InnoPage SDS Reduced BritBlue Protein Loading Buffer 5x

InnoPAGE 10% Bis-Tris Precast Page Gel - 10 Well

InnoPAGE 10% Bis-Tris Precast Page Gel - 12 Well

InnoPAGE 10% Tris-Glycine Precast Page Gel - 10 Well

InnoPAGE 10% Tris-Glycine Precast Page Gel - 12 Well

数量

我们所有的产品都有30天的退货/退款政策保证。请百分百放心地购物。

订单总额超200元包邮

加入购物车

立即下单

产品详情
评论

Document

通

用

Wide-Body

Design

蛋

白

凝

胶

电

泳

槽

宽体设计 优良选材 稳定快速

ProExlle™ Quick InnoPage™ Electrophoresis Tank

Wide-body compatible design, selected

high-quality materials, stable and quick to use.

优良选材

更坚固，更明亮！

采用高强度进口PC材料（聚碳酸酯），先进成型工艺

透明度高，经久耐用，更便于观察实验过程。

High-strength imported PC

materials create a bright tank,

which is more durable and durable!

It is convenient to observe the

experiment process.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

宽体设计

适用InnoPage™及市场主流胶板！

专为InnoPage™独特的超大面积电泳预制胶板而设计

同时，适用市场上应用的主流品牌预制胶板。

The wide body design is more versatile,

suitable for InnoPage™ Precasted Gel, and

compatible with other mainstream brands of

Precasted Gel in the market.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

稳固可靠的结构设计

巧妙！

细节见真章，稳固不漏液

扳动梯形密封夹手柄，即可使胶板受力均匀

Stable and reliable structure design, very clever! Stable and

leak-proof.

Flip the handle of the trapezoidal seal clamp to make the rubber

sheet evenly stressed.

上盖开口

更利于热量散发！

采用上盖开口设计，加强散热

能够有效避免水雾形成。

Adopt upper cover opening design to enhance

heat dissipation.

Can effectively avoid the formation of water

Precasted Gel in the market.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

铂金电极丝

纯度≥99.95%，导电性能优越!

高纯度铂金丝

更好的导电性、无污染缓冲液、耐电解腐蚀、耐高温

Platinum wire with purity ≥99.95%.

Better conductivity, pollution-free buffer,

electrolytic corrosion resistance, high

temperature resistance.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

开盖即断电

安全无隐患！

安全盖重新设计电极插头，摒弃传统垂直走向

从多个安全考虑出发，免除可能产生的操作安全问题。

Open the cover and cut off the power to

eliminate safety hazards!

Redesign the electrode plug, abandon the

traditional vertical orientation, multiple safety

considerations, and avoid possible operational

safety problems.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

贴心专用三种黄金搭档

电泳缓冲液。

Tris Hepes缓冲液中，蛋白迁移速率比Tris Glycine缓冲液

更快，且分辨率更好；

Tris-MPOS缓冲液适用于大分子量蛋白的分离；

Tris-MES适用于小分子量蛋白的分离。

In Tris Hepes buffer, the protein

migration rate is faster than Tris Glycine

buffer, and the resolution is better;

Tris-MPOS buffer is suitable for the

separation of large molecular weight

proteins;

Tris-MES is suitable for the separation

of small molecular weight proteins.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

InnoPage™胶板不含SDS

既可分析天然态蛋白，也可分析变性态蛋白。

InnoPage™凝胶不含SDS，对于变性蛋白质，我们建议使用

Tris-Hepes-SDS缓冲液；对于天然蛋白质，我们建议使用

Tris-Hepes缓冲液。

InnoPage™ gel does not contain SDS. For

denatured proteins, we recommend using

Tris-Hepes-SDS buffer; for natural

proteins, we recommend using

Tris-Hepes buffer.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

品质配件

量身打造。

购买ProExlle™ Quick 系列通用蛋白凝胶电泳槽，可搭配选购

InnoPage实心胶板(挡板)、InnoPage蛋白质专用凝胶割刀，搭配

使用效率更高

The purchase of ProExlle™ Quick InnoPage™

Electrophoresis Tank can be matched with the

optional InnoPage solid rubber sheet (baffle) and

InnoPage protein special gel cutter, the combined

effect is better.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

一次运行两块凝胶

通用且高效!

ProExlle™ Quick 系列通用蛋白凝胶电泳槽可以同时运行两

块凝胶，通常在60分种内即可完成电泳实验，节省宝贵时间。

ProExlle™ Quick InnoPage™ Electrophoresis Tank

can run two pieces of Precasted Gel at the same

time, and the electrophoresis experiment can

usually be completed within 60 minutes, saving

valuable time.

ProExelle Quick™

InnoPage™ Electrophoresis Tank.

产品

参数信息

Parameter

Information

用途 Use

仅供研究使用

For research use only
分离范围 Separation range

3至250 kd

3 to 250 kd
推荐应用 Recommended application

原生或变性

Native or Denatured

适配器 Adapte

无

None
外形尺寸 Dimensions

含安全盖(L)130×(W)144×(H)158mm

With cover (L)130×(W)144×(H)158mm
适用凝胶 Applicable gel

InnoPage™或≤(L)100×(W)10×(H)105mm

InnoPage™ or ≤(L)100×(W)10×(H)105mm

材质 Material quality

PC(聚碳酸酯)

Polycarbonate
重量 Weight

小于1千克

＜1.0kg
容量 Capacity

1~2块凝胶

1~2 pieces of gel

运输条件 Transport conditions

室温0~30℃

Room temperature 0~30℃
储存环境 Storage environment

室温

Room temperature
电源电压 Power supply voltage

最大电源电压220V

200V(MAX)

以上页面中的出现的产品图片仅作示意,实物产品效果(包括但不限于外观、颜色、尺寸)可能略有差异,请以实物为准。

实际使用中可能因产品个体差异、使用条件和环境因素不同而略有不同,请以实际使用的情况为准。

由于产品批次和生产供应因素实时变化,为尽可能提供准确的产品信息、规格参数、产品特性，OurProteinFactory.com可能实时调整和修订以上页面中的文字表述、图片效果等内容,以求与实际产品性能规格、指数、零部件等信息相匹配。

如遇确有进行上述修改和调整必要的情形,恕不专门通知。

The product pictures appearing on the above page are for illustration only, the actual product effects (including but not limited to appearance, color, size) may be slightly different, please refer to the actual product.

In actual use, there may be slight differences due to individual product differences, use conditions and environmental factors. Please refer to the actual use.

Due to the real-time changes in product batches and production supply factors, in order to provide as accurate product information, specification parameters, and product characteristics as possible, OurProteinFactory.com may adjust and revise the textual expressions, picture effects and other content on the above pages in real time in order to be realistic Match product performance specifications, indexes, parts and other information.

In the event that the above-mentioned modifications and adjustments are indeed necessary, no special notice will be given.